Reverse Osmosis Acidic Cleaning Agent Clear Amber Liquid

Water treatment chemicals:Water treatment chemicals:Reverse osmosis cleaning agent (acidic)

(1) Product performance

(1) Applicable to all brands of aromatic polyamide membranes;

(2) Low foaming formula;

(3) The pH of the diluent is adjusted to maintain between 2.0 and 3.0;

(4) Liquid medicine can shorten the mixing time;

(5) Reusable.

Reverse Osmosis Cleaner is a low pH liquid formula used to remove metal hydroxides, calcium carbonate and other types of scale.

(2) Technical indicators

(3) How to use

(1) Check and clean the water tank, pipelines and security filters, and install new filter elements if necessary;

(2) Inject an appropriate amount of reverse osmosis produced water into the cleaning box;

(3) Slowly add the calculated dosage, use a clean water pump to circulate and mix the lotion, and measure the pH between 2.0-3.0;

(4) Cycle cleaning and measure the pH every 5-20 minutes; when the pH rises above 4, add a certain amount of cleaning agent or acid. Until the pH no longer continues to rise, the cleaning is completed;

(5) If the contamination is serious, sometimes it is necessary to completely drain the first batch of cleaning fluid to prevent redeposition of contaminants; then prepare the cleaning fluid again.

(6) During the cycle, pay attention to the temperature rise and do not exceed the specified temperature.

The usual dilution ratio is 10% of the entire cleaning fluid.

(4) Packaging and storage

Reverse osmosis cleaning agent is a liquid product and is packaged in 25kg barrels.

( 5 ) Safety and protection

Reverse osmosis cleaning agent is weakly acidic. Pay attention to labor protection during operation and avoid contact with skin, eyes, etc. Rinse with plenty of water after contact.